Making/Handling More Calls; Receiving A Second Call - Siemens XELIBRI User Manual

Call Features

Making/handling more calls

During a call, choose Options and Additional call. Dial
a number (or choose ã to use Phonebook) and call as
usual. When connected, you have the following options:
• Swap – switch between calls. Ending one call enables
you to resume the other.
• Transfer – connect the calls and exit (limited
availability).
• Join – connect the calls. You can add up to five
additional calls to a conference by repeating the steps
above. Clicking
12
concludes the call for all parties.

Receiving a second call

If you subscribe to your service provider's call waiting
service, you may be alerted to an incoming call while
you are using XELIBRI. To set call waiting, see p 23.
To accept an additional call
Choose Options, Accept. This holds your current call
and answers the new one. Choose Options and Swap
to switch between calls.
Ending one call enables you to resume the other.
To reject an additional call
Click .
To end your current call and accept a new one
Choose Options, End to end your current call and
answer the new call as normal.
If you ignore or reject a new call, it will be diverted if
answering/forwarding is switched on (p 20).