Disassembly Instructions - Nokia 3510 Service Manual

Nokia Mobile Phones Customer Care E&A
Technical Services, Repair Concepts

5. DISASSEMBLY INSTRUCTIONS

Release the A-Cover from the bottom side of the
unit.
Also, protect the inner part of the window with a
foil. The Keymat is loose inside the A-Cover.
When releasing the side clips of the D-Cover you can
use the SRT-6.
Take away the Display Assembly (UI module) and
avoid touching the pads with your fingers.
Service Manual 3510 Level 2
PAGE 10 (17)
Confidential
Take away the A-Cover.
Open the six screws in the predefined order with a
When re-assembling, the reverse
Torx 6 driver.
order has to be taken with a torque of 28 Ncm.
This is the second clip.
There are two snaps on each side of the Metal
Frame.
Copyright 2002 © Nokia Corporation
Approved 1.0
SQX 00443-en MWy
22.05.2002