Control Panel And Touch Buttons - Blueair Classic 400 Manual

Control panel and touch buttons

The control panel and touch buttons are located under the flip-up lid (see Step 2 "Starting up the
unit"). A grey circle around a touch button indicates that it is inactive. When the unit is turned on, all
touch buttons on the control panel (except for airflow speed control); will dim down after 20 seconds.
Tap the control panel and the touch buttons will light up again.
Classic control panel touch buttons
Wi-Fi
Status grey - OFF (no Wi-Fi)
Status "blinking" - no connection.
Wi-Fi ready to be connected.
Status grey and blue
Wi-Fi connected
Air flow speed control
Status grey - OFF
Status blue and all bars are grey -
the power cable is plugged in.
25
Wi-Fi FILTER
Status 1 blue bar - minimum speed
Status 2 blue bars - medium speed
Status 3 blue bars - maximum speed
Filter
Status grey and blue -no replacement
filter currently needed.
Status orange - replace filter and
reset by pressing down for 5 seconds.