Placing The Unit; Getting Started; Control Panel And Touch Buttons - Blueair Classic 200 Series User Manual

Placing the unit

Place the unit in a location where air can cir-
culate freely in, out and around the unit.
Do not place the unit closer than 4" (10 cm)
from another object.
4 ins
10 cm
Do not place the unit directly on or against
soft furnishings such as bedding or linen.

Getting started

Connecting your air puriier - 280i and 205
Follow the instructions below to connect your air puriier to your Blueair Friend mobile app. You can
then enable remote control.
Step 1
Plug the ixed power cable into a
grounded wall outlet.
Open the lip-up lid and press the air-
low speed touch button. When the Wi-
Fi symbol starts to blink, the air puriier
can be paired with the Blueair Friend
mobile app.
Step 2
Download the Blueair Friend mobile app to your smartphone from your app store (Apple App Store
or Google Play).
Step 3
Connect your unit to your Blueair Friend mobile app. Start the app and follow the instructions.
After connecting your air puriier to the Blueair Friend mobile app, you can use the app to control the
unit remotely and adjust settings.
8
Do not place the unit near sources of heat,
such as radiators, ireplaces or ovens.
Do not place the unit near wet areas, such
as bathrooms or laundry rooms where it
may come into contact with water.
Do not place the unit outdoors
Blinking
Wi-Fi
FILTER
Blinking
PM 2.5
VOC
Wi-Fi FILTER AUTO

Control panel and touch buttons

The control panel and touch buttons are located under the lip-up lid (see Step 2 "Starting up the
unit"). A grey circle around a touch button indicates that it is inactive. When the unit is turned on, all
touch buttons on the control panel (except for airlow speed control); will dim down after 20 seconds.
Tap the control panel and the touch buttons will light up again.
Classic 205 control panel touch buttons
Wi-Fi FILTER
Wi-Fi
Status grey - OFF (no Wi-Fi)
Status "blinking" - no connection.
Wi-Fi ready to be connected.
Status grey and blue
Wi-Fi connected
Air low speed control
Status grey - OFF
Status blue and all bars are grey -
the power cable is plugged in.
Status 1 blue bar - minimum speed
Status 2 blue bars - medium speed
Status 3 blue bars - maximum speed
Filter
Status grey and blue -no replacement
ilter currently needed.
Status orange - replace ilter and
reset by pressing down for 5 seconds.
9