Dolphin 9500 Manual page 15

Batch terminal
Table of Contents

Advertisement

Putting the Dolphin in Suspend Mode
To conserve power, press the Power key to put the Dolphin terminal into suspend mode. The terminal may also go into "suspend
mode" when it is inactive for a programmed period of time, as defined by the application.
To wake the Dolphin terminal from suspend mode, press the Power or SCAN keys.
The Dolphin terminal also goes into suspend mode if you remove the main battery pack while the terminal is powered on. In this
case, to wake the Dolphin terminal from suspend mode, install a charged battery and press the Power or SCAN keys.
WARNING! If the main battery and back-up battery are ever fully discharged of power, the terminal will perform a hard
reset when power is restored. The terminal will be restored to its original state. All data stored in RAM
memory will be lost.
Resetting the Dolphin
Soft Reset or Warm Boot
You would perform a soft reset of the terminal if the device hangs or will not function correctly. The soft reset re-boots the device
without losing all data.
To warm boot the Dolphin 9500/9550 terminal:
1 Press and hold the Control (CTRL) and the SHIFT (SFT) keys for approximately 10 seconds, then release.
2 Release the keys and the terminal resets. The red and green LEDs comes blink for approximately three seconds.
3 The terminal will initialize and after a few seconds display the Today screen.
Hard Reset
Under some conditions, you may need to reset the Dolphin 9500/9550 terminal with a hard reset. These may include:
• Resetting the operating system
• Resetting the terminal back to factory defaults
• Resetting the terminal after a bootloader, keyboard, and kernel upgrade
CAUTION!
A hard reset erases all the data stored in RAM memory and all RAM installed applications.
To perform a hard reset:
1 Press and hold the Control (CTRL) and the Escape (ESC) keys for approximately 10 seconds.
2 Release the keys and the terminal resets. The red and green LEDs comes blink for approximately three seconds.
3 When you turn on the terminal again, it will need to be reconfigured; see
page
2-7.
2 - 12
Start the Dolphin 9500/9550 Mobile Computer
Dolphin® 9500/9550 Mobile Computer User's Guide
on

Advertisement

Table of Contents
loading

This manual is also suitable for:

9550

Table of Contents