Step 4. Align The Screen - Dolphin 9500 Manual

Step 4. Align the Screen

After a hard reset, you are prompted to align the screen:
• Use the stylus shipped with your Dolphin terminal to tap the target wherever it appears on the screen.
Alignment should always be performed with a stylus designed for touch screen applications. The small point is required for
accurate calibration. The stylus should be oriented at a 90 degree angle to the screen surface.
• Press the stylus firmly into the center of the cross-hair target once and release. Do not "double-tap" the target. You will be
prompted to repeat this process for a total of five targets.
Note: You can align the screen at any time in the future by going to Start > Settings > System tab > Screen > Align Screen.
After aligning the screen, follow the directions on the screen which take you through a simple exercise showing how to use the
stylus and pop-up menus.
Note: HHP recommends using screen protectors for Dolphin 9500/9550 terminals; especially for those terminals used
within applications that require high-volume interfacing with the touch screen. Screen protectors help prevent
damage to the touch screen and are easily installed. Screen protectors can be purchased at any major computer
retail store or directly from HHP, Inc. Please contact HHP directly for part numbers and pricing.
2 - 8
Tap the Target
Dolphin® 9500/9550 Mobile Computer User's Guide