Table of Contents
Advertisement
1 Plug the cable into the connector on the bottom panel.
2 Plug the adapter into the appropriate power source. The main battery begin charging immediately.
Step 3. Start the Dolphin 9500/9550 Mobile Computer
Follow these steps to start your Dolphin 9500/9550 mobile computer.
1 Install the charged battery pack in the Dolphin terminal.
2 The red LED illuminates and the green LED blinks for approximately three seconds.
NOTE: DO NOT PRESS ANY KEYS WHILE THE TERMINAL IS BOOTING UP.
3 The terminal initializes and the HHP splash screen displays for a few seconds.
Build: 5.XX/5.XX/5.XX
Keyboard
Kernel
Bootloader
4 The system performs a hard reset. Follow the instructions that appear when the display activates again.
Dolphin® 9500/9550 Mobile Computer User's Guide
2 - 7
Advertisement
Table of Contents
