Advertisement
1-2-3. Installing the Base [18] <18>
Install the Legs [16] <16> so that their lower parts are
fitted within the Ribs. (See Fig.5.)
1-3. Screw Tightening Torque
D4 x 10 Tapping Screws with Flange
D4 x 16 Tapping Screws with Flange
D4 x 20 Tapping Screws with Flange
D4 x 20 Tapping Screws
M4 x 10 Machine Screws
M4 x 12 Machine Screw
Pillar Terminals with terminal screws......... 0.39 ± 0.1 N⋅ ⋅ ⋅ ⋅ m (4 ± 1 kgf-cm)
Slide Switch with terminal screws .............. 0.39 ± 0.1 N⋅ ⋅ ⋅ ⋅ m (4 ± 1 kgf-cm)
1-4. Wiring and Connecting Diagrams
Perform the wiring as follows.
With the internal wire pointed at A, insert
the Tab Terminal (blue) [7] <7>.
With the internal wire pointed at A, insert
the Internal Wire (brown) [6] <6>.
Fig. 6 Internal Wires Assembly Positions (View from Commutator Side)
Tab Terminal [7] <7>
Press the Tab Terminal
deeply into position.
Internal Wire [6] <6>
Press the Tab Terminal
deeply into position.
1.96 ± 0.49 N⋅ ⋅ ⋅ ⋅ m (20 ± 5 kgf-cm)
1.8 ± 0.4 N⋅ ⋅ ⋅ ⋅ m (18 ± 4 kgf-cm)
A
A
A-A
Fig. 7 Inserting Direction of Internal Wires
−#3 −
Rib
Fig. 5
a
B
With the internal wire pointed
at B, insert the Internal Wire
(blue) [26] <26>.
With the internal wire pointed
at B, insert the Tab Terminal
(brown) [27] <27>.
b
B
B-B
Press the Tab Terminal
deeply into position.
Internal Wire [26] <26>
Press the Tab Terminal
deeply into position.
Tab Terminal [27] <27>
Lower part
[18] <18>
Advertisement
