Related Manuals for Omni OCA 500
Summary of Contents for Omni OCA 500
- Page 1 OCA 500/900/1200 Professional Series Air Purification Machine Operation and Maintenance Manual omnicleanair.com | 425.512.0379 | 4640 Campus Place, Suite 100, Mukilteo, WA 98275 USA...
-
Page 2: Table Of Contents
Lock/unlock settings Settings review Normal Operations HEPA Filtration UVGI Bulbs PreFilter Maintenance & Troubleshooting Error and Status Table HEPA filter replacement UVGI bulb replacement PreFilter replacement Additional Troubleshooting Warranty Omni CleanAir Limited Warranty To submit a warranty claim Technical Support contact... -
Page 3: Safety Warning Instructions
High-intensity Ultraviolet light inside. Avoid eye and skin exposure. Product Description: The Omni CleanAir OCA500, OCA900 and OCA1200 Professional Series air purification machines are equipped with medical grade 99.99% HEPA filters and UV-C germicidal Irradiation, which work together to eliminate sub-micron particulates and microbial contamination for healthcare services, dentist offices, personal care facilities and other work environments. -
Page 4: Receiving & Unpacking Instructions
Carefully remove unit from packaging. Remove Quick-Start Guide for assistance in setting up the machine for operations. Visually inspect the unit for damage. If there is any visible damage or missing parts, please contact Omni CleanAir immediately. OCA 500/900/1200 Specifications... -
Page 5: Display And Monitoring Panel
Display and Monitoring Panel First Time Setup Plug OCA unit into appropriate power source. The power button will flash green. Press power button . The unit will perform an internal safety/maintenance check. If there are any safety or maintenance issues, one or more of the HEPA, UVGI or PREFILTER indicators will turn red and the housing light for that area will flash blue. -
Page 6: Assigning Location Id
Enter Room ID allows you to assign a 3 digit alpha-numeric code to the space the unit is located in. This is helpful if you plan to move it frequently. Use the UP/DOWN arrows to change; OK to select. The unit will then go into operational mode. The display will show Cubic Feet per Minute (CFM) or Cubic Meters per Minute (CMM). -
Page 7: Uvgi Bulbs
UVGI bulbs are installed in the compartment below the HEPA filter. The air passing by the UVGI bulbs is sterilized and the bio-contaminants captured on the HEPA are killed or deactivated. To maintain the full effectiveness of the UV Germicidal Irradiation we recommend replacing the bulbs after 8000 hours of operation. -
Page 8: Hepa Filter Replacement
Reinstall the light compartment door. Plug in and turn the unit back on; if the UVGI indicator is still red, the problem could be one or more of the ballasts. Call Omni CleanAir Technical Support for additional assistance PreFilter Replacement The pleated filter should be changed when it becomes loaded with dust. -
Page 9: Warranty
Damage caused by misuse, abuse, mishandling or misapplication. Damage caused by alteration or adjustments by unauthorized personnel. Under no circumstances shall Omni CleanAir or any supplier of Omni CleanAir be liable for any loss, damage or expense, including, but not limited to, loss or damage arising out... -
Page 10: To Submit A Warranty Claim
If it is determined that your product is defective and under warranty, Omni CleanAir will repair or replace, at our discretion, any faulty parts or equipment. A Return Merchandise Authorization (RMA) will be issued for the defective product.