Related Manuals for Omni CleanAir OCA 500 Professional Series
Summary of Contents for Omni CleanAir OCA 500 Professional Series
- Page 1 Operation and Maintenance Manual OCA 500/1200 Professional Series Air Purification Machine omnicleanair.com 425-512-0379 info@omnicleanair.com 4640 Campus Place, Ste 100, Mukilteo, WA 98275...
-
Page 2: Table Of Contents
PreFilter Replacement ………………………………………………………………………... Resetting the Machine Status …………………………………………………………………………………………………. System Self-Test …………………………………………………………………………….. Additional Troubleshooting Warranty …………………………………………………………………... Omni CleanAir Limited Warranty ……………………………………………………………………………. To Submit a Warranty Claim ………………………………………………………………………………. Technical Support Contact omnicleanair.com 425-512-0379 info@omnicleanair.com 4640 Campus Place, Ste 100, Mukilteo, WA 98275... -
Page 3: Safety Warning Instructions
High-intensity Ultraviolet light inside. Avoid eye and skin exposure. ● Product Description The Omni CleanAir OCA500 and OCA1200 Professional Series air sanitizing machines are equipped with medical grade 99.99% HEPA filters and optional UV-C germicidal lights, which work together to eliminate sub-micron particulates and microbial contamination for healthcare services, dentist offices, personal care... -
Page 4: Receiving & Unpacking Instructions
Carefully remove unit from packaging. Remove Quick-Start Guide for assistance in setting up the machine for operations. Visually inspect the unit for damage. If there is any visible damage or missing parts, please contact Omni CleanAir immediately. OCA 500/1200 Specifications... -
Page 5: Display & Monitoring Panel
Display & Monitoring Panel User Interface with UVGI (OCA510 & OCA1210) User Interface without UVGI (OCA500 and OCA1200 First Time Setup Turn Plug OCA unit into appropriate power source. The power button will flash white. Press power button. The unit will perform an internal safety/maintenance check. If there are any safety or maintenance issues, one or more of the HEPA, UVGI or PREFILTER indicators will turn red and the housing light for that area will flash blue. -
Page 6: Assigning Location Id
Enter Room ID allows you to assign a 3 digit alpha-numeric code to the space the unit is located in. This is helpful if you plan to move it frequently. Use the UP/DOWN arrows to change; OK to select. The unit will then go into operational mode. The display will show Cubic Feet per Minute (CFM) or Cubic Meters per Minute (CMM). -
Page 7: Machine Information Check
Machine Information Check Information about your OCA machine can be reached from the Main Menu by pressing OK; then using the UP/DOWN arrows and selecting Show Machine Info. The display will show Model Number, Serial Number, Software Revision and Date of Manufacture. Press OK to return, then UP/DOWN to Go Back to Main Menu. -
Page 8: Maintenance & Troubleshooting
Maintenance & Troubleshooting Status Monitoring The OCA Series machines continuously monitor the UVGI, HEPA and PreFilter systems for failures, errors and scheduled replacement times. If any of these systems require attention, the Display screen will show a “Check Status” advisory and “Warning” triangle symbol. At the same time, the panel status indicator LEDs and the lights in the corresponding areas on the front casing will alert the user and describe the issue. -
Page 9: Hepa Filter Replacement
Reinstall the light compartment door. Plug in and turn the unit back on; if the UVGI indicator is still red, the problem could be one or more of the ballasts. Call Omni CleanAir Technical Support for additional assistance PreFilter Replacement The pleated filter should be changed when it becomes loaded with dust. -
Page 10: System Self-Test
Check the power button, which should glow white. c. Check all error indicators and confirm that all functions are operating correctly. d. Contact Omni CleanAir Technical Support to troubleshoot further. 2. The machine just hums when turned on a. Unplug the unit. -
Page 11: Warranty
Damage caused by alteration or adjustments by unauthorized personnel. ● Under no circumstances shall Omni CleanAir or any supplier of Omni CleanAir be liable for any loss, damage or expense, including, but not limited to, loss or damage arising out of the failure of the products to operate for any period of time, inconvenience, the use of rental or replacement equipment, loss of profits or other economic loss, or general,... -
Page 12: To Submit A Warranty Claim
If it is determined that your product is defective and under warranty, Omni CleanAir will repair or replace, at our discretion, any faulty parts or equipment.