Haier CHM9BPL3 Service Manual page 16

SERVICE MANUAL
Door/lid left open.
Freezer
Too frequent or too long to
starts/stops too
door/lid openings.
frequently
Temperature control set too
cold.
Door/lid left open.
Too frequent or too long
door/lid openings.
Temperature control set too
Freezer operates
cold.
●
too long
Inadequate air circulation
space around cabinet.
Fast Freeze switch is in the
ON position (on some
models)
Floor may be weak, causing
freezer to vibrate when
compressor is on.
Noisy operation or
cabinet vibrates
Cabinet is not positioned
solidly on floor
Door/lid left open.
Freezer
temperature too
Too frequent or too long
warm
door/lid openings.
Temperature control OFF or
Min or 0 positions.
Freezer is unplugged.
Foods defrosting
The fuse is blown/circuit
breaker is tripped.
Door/lid left open.
Too frequent or too long
door/lid openings.
Temperature control set too
cold.
Freezer
temperature too
Fast Freeze switch is in the
cold
ON position or has run for too
long (on some models)
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
●
See About the operation of the freezer
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
See About the operation of the freezer
See Preparing to install the freezer
See About the operation of the freezer
Placing 2 X 4s (51 mm X 102 mm) under the
length of the freezer will help support it and
may reduce vibration.
See Preparing to install the freezer Or use
●
shims for uneven floor
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
Move the control to a temperature setting.
Push the plug completely into the outlet.
●
Replace fuse or reset the breaker
●
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
See About the operation of the freezer
About the operation of the freezer
15
15