Fame Audio MS 2002 D User Manual page 21

Installation:
Be sure to check the unit for damage before use. Use the original packaging or a suitable
transport or storage packaging to protect the product from dust, moisture, etc. when not in use.
During assembly, suitable protective equipment (in particular head protection, gloves and safety
shoes) must be worn and only suitable climbing aids (ladders, scaffolding, etc.) must be used.
The responsibility for this lies solely with the installation company.
The operator of power amplifier systems (stationary or mobile) is obliged to regularly inspect all
system components (suspensions, brackets, power amplifiers, etc.) for their safety or to have
them inspected in accordance with the relevant national regulations in order to remedy any
damage without delay. Furthermore, we urgently recommend detailed documentation of all
inspection measures in test books or similar.
In the case of prolonged or permanent use of power amplifiers outdoors, wind, snow and ice
loads, as well as the general thermal influences, are particularly important for the stability and
load-bearing capacity of superstructures and surfaces.
In particular, the load carrying points of flown systems should be dimensioned here with sufficient
safety reserves. The national regulations must be observed.
WARNING! (Risk of injury from overturning)
Improper installation can cause considerable injury and damage!
During transport and installation, ensure that only aids specified by the manufacturer
(e.g. trolleys, stands, tripods, brackets, etc.) are used and always follow the
manufacturer's instructions!
Using this device with sinusoidal, square-wave or other measuring signals at higher
levels will cause serious damage to the device!
ENGLISH