LG 32LC2R Series Owner's Manual page 72

01. Power (Command2:a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Data 1 : Power On
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit 'FF'
data based on this format, Acknowledgement data
feedback presents status about each function.
02. Aspect Ratio (Command2:c) (Main picture size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or
in the SCREEN menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Date 1: Normal screen (4:3)
Date 2: Wide screen (1 6:9)
Date 3: Spectacle
Date 4: Full screen (Zoom1)
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
03. Screen Mute (Command2:d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
04. Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on)
Data 1 : Volume mute on (Volume off)
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
Date 5: Full screen (Zoom2)
Date 6: Original
Date 7: Wide screen (14:9)
Date 8: Full (Option)
05. Volume Control (Command2:f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to 'Real data mapping 1 ' . See page 73
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
06. Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to 'Real data mapping 1' . See page 73
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
07. Brightness (Command2:h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to 'Real data mapping 1' . See page 73
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
08. Colour (Command2:i)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to 'Real data mapping 1' . See page 73
Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
09. Tint (Command2:j)
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
Refer to 'Real data mapping 1' . See page 73
Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
71