Stb(Set-Top Box) Setup - LG 32LC2R Series Owner's Manual

CONNECTIONS & SETUP

STB(SET-TOP BOX) SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
■
receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
When connecting with a component cable
Connect the video outputs (Y, P
1
set-top box to the COMPONENT IN VIDEO jacks on the set.
2
Connect the audio output of the digital set-top box to
the COMPONENT IN AUDIO jacks on the set.
3
Turn on the digital set-top box. (Refer to the owner's
manual for the digital set-top box.)
4 Select Component input source with using the INPUT
button on the remote control.
!
NOTE
Signal
480i/576i
480p/576p/720p/1080i
When connecting with a HDMI to DVI cable
1 Connect the DVI output of the digital set-top box to the
HDMI1(DVI) IN jack on the set.
2
Connect the audio outputs of the set-top box to the
AUDIO(RGB/DVI) jack on the set.
3
Turn on the digital set-top box. (Refer to the owner's
manual for the digital set-top box.)
4 Select HDMI1/DVI input source with using the
INPUT button on the remote control.
!
NOTE
If the digital set-top box has a DVI output and no HDMI output, a separated audio connection
G
is necessary.
If the digital set-top box supports Auto DVI function, the output resolution of the digital
G
set-top box will be automatically set to 1280x720p.
If the digital set-top box does not support Auto DVI, you need to set the output resolution
G
appropriately. To get the best picture quality, adjust the output resolution of the digital set-top
box to 1280x720p.
22

, P ) of the digital
B R
Component RGB-DTV HDMI1/DVI (DTV)
Yes No No
Yes Yes Yes
Digital Set-top Box
(R) AUDIO (L)
B R
1
VARIABLE
AUDIO OUT
COMPONENT IN
VIDEO
HDMI2 (DTV)
No
Yes
RGB
HDMI IN (PC/DTV)
2
RS-232C IN
1 (DVI) (CONTROL&SERVICE)
1
DVI OUTPUT (R) AUDIO (L)
2
AUDIO
RGB IN
AUDIO
(RGB/DVI)
2
Digital Set-top
B o x