Gigabyte K8S760M Series Manual page 12

Installation Instructions
UART COM Connector(COM2)(optional)
Besides COM1 on the back panel, the mainboard also supply another COM connector
which connects with serial mouse, MODEM and other serial device.
SPDIF OUT Connector(optional)
The SPDIF output allow your digital audio input from digital audio devices.
INTR
The connector connects to the chassis security switch on the case. The system can
detect the chassis intrusion through the status of this connector. If the connector has
been closed once, the system will record the status and indicate the chassis has been
opened. You can monitor or check this information from some software.
DCD
COM2
T X D
GND
R T S
RI
GND
SPDIF OUT
Cut away
1
SPDIF_OUT
INTR
Indicate signal
1 2
1
RXD
D T R
DSR
C T S
NC
GND
1
K8S760M