Connecting Input Devices - Dukane ImagePro 8039B User Manual

Connecting Input Devices

You can connect more than one input device to the projector at the same
time. The procedure below shows examples of typical input devices.
Connect the USB cable to the
projector and the PC.
Connect a cable (not supplied)
to the projector's VGA/RGB-
in connector and the PC's
video-out connector. Tighten
the securing screws on both
connections.
Connect a video device (VCR,
DVD or video camera) to the
A/V ports. If the device has
both S-video and composite
video connectors (RCA jacks),
use S-video for better quality.
Connect a second projector or
display to the RGB-out
connector.
VCR/DVD or
video camera
nd
2 projector
or display
– 11 –