Table of Contents
Advertisement
Arrangement (continued)
Connecting with your devices
Make sure that all the devices are suitable to be connected with this product, and
this manual.
1
website. (
)
COMPUTER IN of the INPUT menu, that port will accept component video signals.
computer's LAN port, or with an access point that is connected to the computer
with wireless LAN, using a LAN cable.
port and select the port as the input source, you can view images stored in the device.
WARNING
manufacturer. Consult your dealer when the required accessory did not come
with the product or the accessory is damaged. It may be regulated under some
standard.
projector. That may be required by EMI regulations.
- Neither disassemble nor modify the projector and the accessories.
accessories. Route a cable so that it is neither stepped on nor pinched out.
CAUTION
in operation, unless that is directed in the manual of the device.
the administrator of the network.
voltage.
use the wireless network function of this projector.
off the power of the projector and pull out the power cord's plug from the outlet.
(continued on next page)
COMPUTER IN1 or COMPUTER IN2 port in
LAN port to any network that might have the excessive
F-3 to F-5 at the back of
LAN port with the
USB TYPE A
7
Advertisement
Table of Contents
