Operation Instructions; Startup; Standby; Selecting Signal Source - Prestigio PDSIK43WNN0L Quick Start Manual

Quick Start Guide Prestigio Digital Signage Wall Mount

5. Operation Instructions

Startup

Connect the power plug to the power socket, press the key
on the panel or the Standby key on the remote control to turn on the monitor.

Standby

Press the Standby key on the remote control, the monitor goes to Standby.
Tips
The product is environment-friendly:
① If no signals are detected in 5 minutes after startup, it enters the Standby mode;
② It enters the Standby mode when it reaches the time to switch off;
③ Power plug must be removed when the complete power-off is needed.

Selecting Signal Source

1. Press the "Signal Source" key on the remote control or the
the Signal Source menu appears;
2. Press the arrow keys on the remote control, or the ▲/▼keys on the panel
to select a signal source, such as HDMI, VGA and USB;
3. Press the OK key on the remote control or the
EN - 7
key on the panel,
key on the panel to confirm.
5