Hammerhead HG375 Parts Manual page 4

INTRODUCTION
HOW TO USE THIS MANUAL
This manual contains illustrations and parts list of components and assemblies which make
up various HammerHead® models. Each page consists of the name of the assembly or
component, a figure number, reference numbers, part numbers, part names, and the
quantities of the parts used.
Assembly or component names help identify the illustration and parts for each figure. This
name also helps locate the general area of the machine where the assembly or component
can be located.
Figure numbers are used to identify each assembly or component and to group these
assemblies or components into major categories.
Reference numbers shown in a column refers to the numbered parts in the illustration. This ties
the part in the illustration to the part number and description in the parts list. Part numbers
are used to identify individual parts or part assemblies.
Part descriptions provide the name of the part, plus additional information such as
dimensional specifications and what parts are grouped together to form part assemblies,
which helps you identify the part(s).
Quantities listed for each figure are only for that assembly or component and not the total
used per machine unless stated so in the "Remarks" column.
This parts manual is not intended to be a complete guide for machine service or repairs.
Contact your HammerHead dealer for any of your service or technical requirements.
ORDERING PARTS
Parts for repair or replacement are available through the worldwide network of authorized
HammerHead dealers. The use of aftermarket replacement parts in your HammerHead
equipment reduces performance and overall equipment life and may also void or interfere
with the factory warranty.
Use only genuine HammerHead parts from your authorized dealer for repair or replacement.
Always give the serial number and model number of the machine for which parts are
being ordered. When ordering parts for component(s), which are not manufactured by
HammerHead Trenchless Equipment, also give the serial number of that component(s).
Order all parts by part number, part name, and quantity needed. Do not order parts by
illustration reference numbers.
2