Electrolux EW 1280 F Instruction Booklet page 12

Change button allows you to select/change the
status of the different icons.
Extra Rinse
Yes 10.55
Exit
Temp. Spin Options Change
Exit button allows you to return to the previous
selection.
COTTON 08.30
CYCLE END AT 10.55
60°C 1200
Temp. Spin Options Change Exit
Depending on the program, different functions can be
combined. These must be selected after choosing the
desired program and before depressing the
START/PAUSE button.
By depressing the "Options" button, all the symbol
icons, allowed for the selected programme will appear
in the display (allowed for the selected programme).
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press
"Change" button. There will appear a line below the
selected icon, indicating that the option is set.
To select the other options press again the «Options»
button and proceed as before.
Once you have completed the selection of the options,
pressing the «Exit» button, the selected icons will
remain fixed in the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Important! While selecting the option, if you press the
temperature "Temp.", "Spin" , or Start/Pause button,
the relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the wool/handwash programs
and miniprogramme.The machine will add 2 rinses for
cottons and 1 rinse for synthetics, delicates and silk.
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing program in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this
option «Short» or «Very Short» will be shown in the
display.
DELAY START: this option makes it possible to
delay the starting of the washing program by 30 min -
60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display.
Delay Start
No
Temp. Spin Options Change
You must select this option after you have set the
program and before you press the START/PAUSE
button.
You can cancel the delay time at any moment, before
you press the START/PAUSE button. If you have
already pressed the START/PAUSE button and you
wish to cancel the Delay time proceed as follows:
1. set the washing machine to PAUSE by pressing
the START/PAUSE button;
2. deselect the Delay start option, changing the
status;
3. press the START/PAUSE button to start the
program.
Important!
The selected delay can be changed only after
selecting the washing programme again.
The door will locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
The Delay Start cannot be selected with SPIN and
DRAIN programmes.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash cycle, miniprogram
and silk).
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
12
Delay Start
10.55 Start in 30 min
Exit Temp. Spin
Options Change
11.25
Exit