Advertisement
email:
info@riverside-furniture.com
Steps:
1. Lean the back of the Headboard against the wall where the Bed will be assembled.
2. Install the All-Thread Bolts (R-B) into the Headboard and Footboard.
3. Carefully position end of one Bed Rail (R-A) onto the All-thread Bolts on the
Headboard and Footboard and connect by using the Arc Washers (R-D) and Hex
Nut (R-C). Repeat for other Bed Rail.
4. Carefully align the Footboard and Headboard to be 'square' with the Side Rails.
Using the Open Wrench (R-E) tighten all Hex Nuts attaching the Side Rails to the
Headboard and Footboard. (See Detail A).
Headboard
H-A
Joelle
King Bed
Assembly Instructions
R-A
Page 2 of 5
Made in Viet Nam
R-A
F-A
Footboard
Advertisement
