Using The Machine; Initial Commissioning; Operating The Air Purifier; Control Panel - Miele PAC 1045 Operating Instructions Manual

Using the machine

10

Initial commissioning

Before carrying out initial commissioning, it is important to check that
the air purifier is installed in accordance with appropriate use
guidelines. After installation, allow the air purifier to adjust to room
temperature.
Check the air purifier, the plug and the mains connection cable for
damage. If there is any damage, the air purifier must not be used.
Check the fuse rating of the socket before connecting the plug.

Operating the air purifier

The control panel for controlling the air purifier is located behind the
lockable access flap on the front of the plinth.
Check that the mains connection cable and the plug are intact.

Insert the plug into the socket.

Open the lockable access flap on the plinth of the air purifier and

wait for the controls to complete the self-test.
After the self-test, the
Mode
Use previous setting
Manual mode
Manual+time mode
In the Mode menu, the operating mode can be selected using the 
and  buttons. You can use the previous setting (in the factory de-
fault settings, the previous setting is
ent operating mode. To confirm the selected operating mode, hold
down the  and  buttons for at least 3 seconds.
Depending on which operating mode you select, further selectable
options (e.g. flow, clock control, room size) may be displayed. You
can select these options or skip past them by pressing the  and
 buttons briefly at the same time. The appliance will then switch to
the Ready for operation
When the appliance is ready for operation, it can be switched on via
the  button. If an operating mode with clock (timer) is selected, the
appliance will switch on automatically at the set time.
If you do not select a menu option within 60 seconds, the previous
setting will be adopted automatically and the appliance will switch to
Ready for operation
the
After this step, the operating mode can only be changed in the
tings menu.
Further selectable options relating to the operating modes may be
Settings
available in the
Tip: The previous setting can be selected more quickly in the
menu by simply pressing the  button or by pressing the  and
 buttons briefly at the same time.
Mode
menu appears.
Manual mode
operating status.
operating status.
menu.
) or select a differ-
Set-
Mode