Settings Menu For "Co2+Time Mode - Miele PAC 1045 Operating Instructions Manual

Table of Contents

Advertisement

Settings menu for
"CO2+time mode"
If initial flow is switched on, the air purifier will start the running be-
fore the actual switch-on time: if, for example, the switch-on time is
set for 6:00 am with 5 minutes of initial flow time, the air purifier will
start at 5:55 am.
After the switch-off time, Miele ThermoControl is started with a run-
ning time of 20 minutes. This is followed by a 10-minute fan run-on
phase.
Settings
CO2+time mode
CO2 mode
Room size
CO2+time mode
Individual day setting
Language
Mon–Fri/Sat+Sun
CO2+time mode
Room size
Individual day setting
Mon–Fri/Sat+Sun
CO2+time mode
Individual day setting
Mon–Fri/Sat+Sun
Flow
Modus CO2+Uhr
Mon–Fri/Sat+Sun
Flow
Intensive circulation
CO2+time mode
Flow
Intensive circulation
Back
Sensitivity
The
sub-menu is used to set the sensitivity with which the
controls respond to open windows when activating intensive circula-
tion.
High
When
is selected, intensive circulation is activated more
quickly. When
Low
tion to be activated when a window is open.
If settings are configured, these settings will automatically be adop-
ted for the other operating modes.
Room size
Please set
Individual day setting
On Monday
Off Monday
On Tuesday
Please set
Mon–Fri/Sat+Sun
On Mon–Fri
Off Mon–Fri
On Sat–Sun
Please set
Flow
Off
On
Back
Select option
Flow
Off
On
Back
Select option
Intensive circ. speed
Please set
Intensive circ. time
Please set
Sensitivity
High
Medium
Low
Select option
is selected, it takes longer for intensive circula-
Using the machine
80
07:00
17:00
07:00
Flow speed
%
100
Please set
Flow time
05
min
Please set
100
%
05
min
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pac 1080Pac 1200

Table of Contents