Used Symbols; General Safety Warnings - Dremel VERSA PC10 Original Instructions Manual

GB

USED SYMBOLS

1
READ THESE INSTRUCTIONS
2
DETACHABLE SUPPLY UNIT
3
USE EYE PROTECTION
4
USE A DUST MASK
5
DO NOT DISPOSE OF POWER TOOLS INTO
HOUSEHOLD WASTE

GENERAL SAFETY WARNINGS

READ ALL SAFETY WARNINGS
WARNING
!
AND ALL INSTRUCTIONS
Failure to follow the warnings and instructions may
result in injury.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and use
common sense when operating a tool.
Do not use a tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating tools may
result in serious personal injury.
b. Use personal protective equipment.
Always wear eye protection.
c. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the tool in unexpected situations.
d. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
TOOL USE AND CARE
a. Do not force the tool. Use the correct tool for
your application. The correct tool will do the
job better and safer at the rate for which it was
designed.
b. Do not use the tool if the switch does not turn
it on and off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Store idle tools out of the reach of children and
do not allow persons unfamiliar with the tool or
these instructions to operate the tool. Tools are
dangerous in the hands of untrained users.
d. Maintain tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the tool's
operation. If damaged, have the tool repaired
before use. Many accidents are caused by poorly
maintained tools.
e. If there is any possibility that the machine or
detergents could harm or discolour a surface,
it is recommended that compatibility be tested
in an inconspicuous area before use.
f. Do not use undiluted acids, acetone or solvents.
g. Do not use flammable liquids.
h. Do not touch or insert conductive objects (such
as screwdrivers or similar) into the micro-USB
socket.
i. Do not make any changes or modifications
to the machine. Unauthorized modifications
can impair the safety of your machine, lead
to increased noise and vibrations, and poor
performance.
j. Use the tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work
to be performed. Use of the tool for operations
different from those intended could result in
a hazardous situation.
BATTERY TOOL USE AND CARE
a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b. Use tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
6