Nokia RH-27 Series Technical Documentation Manual page 4

RH-27
Assembly
11. Put the Speaker into the frame so that the guiding
pin goes into its place.
13. Place the UI Module and the engine together by
closing the Display connector.
14. Put the unit into the C-cover.
16. Place the B-cover into its place. Make sure the
snaps on both sides are locked to the module.
Page 4
Step-by-Step Assembly Instructions (Model 6225)
©2003 Nokia Corporation
CCS Technical Documentation
12. Put the Microphone into the frame.
Note! Do not touch the spring contacts.
1.
2.
15. Tighten the six screws in the order indicated above.
Note! Set 20Ncm/650rpm to your Torque driver before
tightening.
17. Place the Keymat into its place.
Confidential
3.
5.
4.
6.
Issue 1 11/2003