Nokia RH-27 Series Technical Documentation Manual page 3

CCS Technical Documentation
5. Put the Volume Key into its place.
7. Put the Antenna into its place.
Note! Do not touch the inside of the Antenna plate.
9. Place the LCD into the UI frame.
10. Fit the Display Shield into its place.
Issue 1 11/2003 Confidential
Step-by-Step Assembly Instructions (Model 6225)
©2003 Nokia Corporation
6. Put the Power Key into its place.
8. Put the UI Board into its place.
Note! Do not press the LCD as it may get damaged.
Make sure the shield is properly locked on both sides to
the frame.
RH-27
Assembly
Page 3