Lorell LLR66984 Assembly Instructions

Model Number LLR66984/66985/66986/66987
K
G
F
J
I
G
H
E
D
C
B
A
Assembly Instructions
Carefully unpack all parts and identify them with parts list before
attempting to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY
UNTIL YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes on 5 STAR BASE (B).
2. Insert GAS LIFT (C) into the center hole top of 5 STAR BASE (B).
3. Insert BELLOW (D) over GAS LIFT (C).
4. Attach BACK CUSHION (I) with the BACK SUPPORT to SEAT
CUSHION (E) by using 3 SCREWS (H).
5. Attach both the left and the right ARMRESTS (G) to SEAT
CUSHION (E) by using 6 SCREWS (F).
6. Insert the pre-assembled seat unit onto the gas lift to finish
the assembly.
7. Be sure that all the screws are fully tightened before using.
Parts List
Description
A. CASTERS
B. 5 STAR BASE
C. GAS LIFT
D. BELLOW
E. SEAT CUSHION
F. SCREWS (¼" X 1 ⁄ ")
1
16
G. ARMRESTS (L&R)
H. SCREWS (M8 X 22MM)
I. BACK CUSHION
J. ALLEN WRENCH (4MM)
K. ALLEN WRENCH (5MM)
Quantity
5
1
1
1
1
6
2
3
1
1
1