Table of Contents
Advertisement
4.1 DialPlan Setup
The Vigor2100V/VG series have one FXS port (the "Phone" port on the rear
panel) to which you connect a conventional (analogue) phone, either corded or
wireless (DECT). You can set the registered SIP address of your VoIP
contacts into the DialPlan of the Vigor2100V/VG series to make calling them
quick and easy. There are 60 entries in the DialPlan for you to store all your
friends and family members SIP address.
There are examples of two-DialPlan-index shown below:
The hardware connection of Vigor2100V series:
Example
1:
If Dolly gives you her SIP URL as sip:63065@fwd.pulver.com, then you can enter
the number just as the figure below. You can apply easy-to-search Display Name and
Phone Number to settings.
20
Advertisement
Table of Contents
