Table of Contents
Advertisement
Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it and lock the side-discharge deflector; refer to
the Side-Discharge Chute (page
Note:
By default this machine is equipped with an economy blade for improved runtime; it also includes an
optional performance blade for improved bagging and performance. Before bagging, install the performance
blade; refer to
Replacing the Blade (page
Installing the Grass Bag
1.
Raise and hold up the rear deflector and unlock the rear plug (A of
2.
Pull out the rear plug (B of
3.
Hang the upper front edge of the bag from the grass-bag pins on the notches of the handle brackets
(C of
Figure
17).
4.
Lower the rear deflector.
18).
23).
Figure
17).
Figure 17
15
Figure
17).
Removing
g240403
Advertisement
Table of Contents
