Sequential TAKE 5 Manual page 73

You are now modulating the waveshape of each oscillator differently.
This gives the sound more animation. Try experimenting with different
LFO
frequency
Adding Effects to the String Pad
You can enhance the string pad adding an effect such as chorus, flanging,
or phasing for a retro feel.
To add effects to the string pad:
1. In the
effect
2. Turn the
3. Set
time
4. Set
depth
5. Set
feedback
6. Set
depth
7. Play some chords. Retro string machine! For even more dramatic phas-
ing, set
depth
8. Experiment with changing the effect to the flanger or chorus and adjust
their settings to your preference.
Adding Reverb to the String Pad
Adding reverb can also enhance the string sound in a very lush way.
To add Reverb to the string pad:
1. In the
reverb
2. Turn the
3. Set
damping
4. Set
predelay
5. Set
decay
6. Set
tone
7. Play some chords. Experiment with the
settings to fine tune the reverb sound to your preference.
64 Creating Synth Brass
and settings.
amount
section, press the
knob and choose
type
to 8 o'clock.
/ to 12 o'clock.
mix
/ to 12 o'clock.
misc
/ to 12 o'clock
mix
/ and
mix feedback
section, press the
knob to 10 o'clock.
mix
to 2 o'clock.
to 2 o'clock.
to 3 o'clock.
to 11 o'clock.
button.
on
.
phaser
/ to 3 o'clock.
misc
button.
on
,
decay predelay
, and
tone
Sequential