Kendal Lighting TC5011-BLK Instructions

Advertisement

Safety Instructions

- CAUTION: All electrical connections should be performed by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
- Safety warnings are placed on the power cord and must be read before plugging in your lamp.
Instructions de sécurité
- AVERTISSEMENT : Toutes les connexions électriques doivent être exécutées par un électricien qualifié.
- Suivez et gardez ces instructions.
- Coupez toujours le courant au niveau du disjoncteur ou débranchez l'appareil de la prise murale avant l'intervention.
- Les avertissements de sécurité inscrits sur le fil électrique de la lampe doivent être lus avant de la brancher.
#1. Install spare rods marked "A", " B", and "C " into
corresponding top shade rods marked "A" , "B", and
"C". ( A to A, B to B and C to C).
#1. Installez les tiges de rechange marquées "A", "B" et
"C" dans les tiges de stores supérieures correspondantes
marquées "A", "B" et "C". (A à A, B à B et C à C).
INSTRUCTIONS
#2. Cut and discard strap that was used to hold Top
shade rods in position.
#2. Coupez et jetez la sangle qui était utilisée pour
maintenir les tiges d'ombrage supérieures en place.
TC5011-BLK
TC5011-SN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TC5011-BLK and is the answer not in the manual?

Questions and answers

Summary of Contents for Kendal Lighting TC5011-BLK

  • Page 1 INSTRUCTIONS TC5011-BLK TC5011-SN Safety Instructions - CAUTION: All electrical connections should be performed by a qualified electrician. - Follow and save these instructions. - Always disconnect power at circuit breaker or unplug from wall outlet before servicing. - Safety warnings are placed on the power cord and must be read before plugging in your lamp.
  • Page 2 #4. Insert rods into corresponding base holes, "A" into "A", #3. Loosen set screws in base rod holes. "B" into "B" and "C" into "C". #3. Desserrez les vis de réglage dans les trous de la #4. Insérer les tiges dans les trous de base correspondants, tige de base.

This manual is also suitable for:

Tc5011-sn

Table of Contents