Kendal Lighting PF44-1LPE-CH Instructions

Kendal Lighting PF44-1LPE-CH Instructions

Advertisement

Safety Instructions

CAUTION:
-
All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Sécurité Supplémentaires
- AVERTISSEMENT: Toutes connections électriques devraient être exécutés par un électrien qualifé
-Suivez et garder ces instructions.
- Débranchez toujours le courant au disjoncteur ou débranchez de la prise murale avant l'entretien.
Warning: Replace with lamps suitable for use in open fixture.
Attention: Remplacer les lampes approprié pour luminaires ouverts.
Unpack your fixture, you should have the following items:
Déballez votre appareil, vous devez disposer des éléments suivants:
A.Mounting plate(plaque de montage)
B.Canopy(dais)
C.Threaded metal rods 4PCS(Tiges métalliques filetées 4PCS)
D.Square metal box (Boîte en métal carrée)
E.G9 50W bulb (G9 50W ampoule )
F.Inner square glass (Inner carré en verre )
G.Metal ring (anneau de métal )
H.Tool(outil)
I.Outer square glass (Extra-atmosphérique en verre carré )
Parts bag(sac de pièces)
1.screws
2PCS (vis 2PCS)
2.Wire nuts 3PCS(Serre-fils 3PCS)
3.Tool(outil)
INSTRUCTIONS
PF44-1LPE-CH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PF44-1LPE-CH and is the answer not in the manual?

Questions and answers

Summary of Contents for Kendal Lighting PF44-1LPE-CH

  • Page 1 INSTRUCTIONS PF44-1LPE-CH Safety Instructions CAUTION: All electrical connections should be done by a qualified electrician. - Follow and save these instructions. - Always disconnect power at circuit breaker or unplug from wall outlet before servicing. Sécurité Supplémentaires - AVERTISSEMENT: Toutes connections électriques devraient être exécutés par un électrien qualifé...
  • Page 2 Mounting Attach the mounting plate to junction box with screws plate Fixer la plaque de montage à la boîte de jonction avec les vis Screws Before installation to ceiling,adjust fixtures to desired length by pushing wire up into canopy,then coiling up excess wire, minor adjustment can be made after installation.To lower or lengthen wire,depress button sleeve located where wire comes out of canopy.

Table of Contents