Table of Contents
Advertisement
SETUP (continued)
UNPACKING AND INSTALLATION
1. Open the Cardboard shipping box to see the Ther-
mocol Box Inside.
2. Remove the User's Guide and follow it for Slit
Lamp installation.
3. On Top of the Thermocol box Table top metal plate
form is placed as Shown in Figure-1. Take it out.
4. Open the Thermocol box. You will find following
Item Packed as Shown in Figure-2.
a) Chin Rest Assembly
b) Microscope Head with Eyepiece Mounted
c) Power Supply Box
d) Base Assembly
e) Patient Resting Handle
f) Illumination Arm Assembly
g) Accessories
- Slit Screen Rod -1
- Wheel Rail Cover -2
- Dust Cover -1
- Chin Rest Paper -100
- Power Supply Mounting Bracket -1
- Allen Keys - 2mm, 2.5mm, 3mm, 5mm
- Breath Shield -1
- Fuse T 1.6A L 250V -1
- Power cord -1
5. Assemble chin rest assembly to table top as shown
in Figure-4 using (6) Allen Screw of M3, securing
with help of Allen Wrench 2.5mm. Refer in figure-3.
6.Assemble the power supply bracket to the table top
using (2) M4 Allen screws with 3mm Allen key pro-
vided with Instrument. Referred as (B) in figure-4.
8126700-795
c
Figure-2 Chin Rest Assembly
Fig.- 3 Chin Rest Attaching Screw
SL 20i
Metal Plate
Figure- 1 Table Top
a
b
f
g
d
e
M3 Screws
(6) Nos.
Fig.- 4 Chin Rest Ground
Issue 1.0
Printed on June,2019
SL 20i
B
9
Advertisement
Table of Contents
