Device Activation And Charging - Nuband ACTIVE 3 User Manual

1.DEVICE ACTIVATION AND CHARGING

A) How to charge it
1. Built-in USB Charger. No additional
A) How to charge it
charger needed.
1. Built-in USB Charger. No additional charger needed.
2. Pull out the band (the side with wristband buckle,
2. Pull out the band (the side without
both sides can be pulled out).
wristband buckle, both sides can be
3. Plug the device (the side with chip) directly
into any USB port, Laptop or an Adaptor or
pulled out).
an Adaptor to charge the battery.
3. Plug the device (the side with chip)
directly into any USB port, Laptop or
an Adaptor to charge the battery.
B) Activate the Device
B) Activate the Device
Before use, please connect the battery charger to
Before use, please connect the battery charger to charge
Charge the device for activation. The progress bar will
the device for activation. The progress bar will change
change from empty to full to indicate full activation. After
from empty to full to indicate full activation. After
activation, the device will start charging the battery.
activation, the device will start charging the battery.
C) Battery Indicator
C) Battery Indicator
The battery indicator is displayed on the home screen of
The battery indicator is displayed on the home screen of the
the device. When the battery of the device is lower than
device. When the battery of the device is lower than 10%, all
10%, all functions are closed and only lower battery icon
functions are closed and only lower battery icon will show to
will show to remind you to charge the battery.
6. Personal Reminder
remind you to charge the battery.
Customize your personal reminder for better life habit,
like pill time, drinking water, etc. Sedentary Alarm is also
supported to remind you exercise more.
EN
Built-in USB Charger
Specifications
Size: Main body: 42 X 10 X 247mm
Wristband: 209.6*16.8 mm
Weight: 21.45 g
- 2 - Battery: 55mAh Rechargeable
lithium polymer battery
Low
Fully
battery
charged
battery