Setting Up Your Nuband Flash Hr 3 - Nuband FLASH HR 3 User Manual

SETTING UP YOUR NUBAND FLASH HR 3

Follow the steps below to set up your Nuband Flash HR 3.
1. Charge your Nuband Flash HR 3 for 2
hours prior to use.
a. Remove the module from the strap,
then plug the module into a USB
charge socket (either on a computer
or a plug). Battery symbol appears if it
is pluged in the right direction and being
charged. Only one direction is chargeable.
b. The screen will show full battery symbol
when it is fully charged.
Tips: When charging, please make sure that
screen side is facing down as shown in picture.
If the charging does not respond, reverse the
USB direction.
- 6 -