Tripp Lite B127A-4X1-BH Owner's Manual page 6

Installation
B127A-4X1-BH
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
IR
IR Control Pad
HDR PLAYER (x4)
SWITCH
1. Make sure all equipment in the installation, such as
televisions, Blu-ray players and the transmitter, is powered off.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect the HDMI source(s)
to the INPUT ports on the switch. Up to 4 HDMI sources can
be connected to the switch.
Projector
Monitor
or or
RECEIVER
6
TV