Table of Contents
Advertisement
You should prepare a power adaptor of the sufficient capacity for supplying 24V input.
Below are the requirements:
Total consumption Power adaptor
LPC Street
48W
9.
Connect the Ethernet cable to the camera's RJ45 socket.
10.
Also pass the combo cable of the IR illuminator through a waterproof connector.
11.
Connect the day/night signal lines from the housing to the DI/DO connectors on the
camera's terminal block.
12345678910
Enclosure Terminal Block
AWG20
AC24V
4A
Camera Terminal Block
AWG26
DC12V
9
Advertisement
Table of Contents
