D-Link DCS-56 Quick Installation Manual page 4

STEP 3: For the DCS-56 and DCS-56P models, Connect the Ethernet cable to the LAN
port of the camera.
Note: Do not use the 12 V DC to power the camera via PoE.
For the DCS-56W model, connect the wireless antenna extender to the camera.
STEP 4: Mount the mount bracket to the location where you want to set up your camera.
To prevent damage to the Ethernet cable, pre-install the cable to the location.
4
12 V DC to main board
of enclosure
Ethernet
12 V DC to camera
Cable for extended
wireless antenna
12 V DC to camera
(optional)
D-Link DCS-56 Series Quick Install Guide
PoE to camera
PoE to main board
of enclosure
12 V DC to camera
(optional)