Table of Contents
Advertisement
to OFF position.
8. Press and release the ON/OFF button to the higher position which is the "0"
position to cut the power source off.
CLEAN AND MAINTENANCE:
— Cut off power source and let the coffee maker cool down completely before
cleaning.
— Clean housing of coffee maker with moisture-proof sponge often and clean
water tank, drip tray and removable shelf regularly then dry them.
— Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing
unit in water for cleaning.
— Detach the metal funnel through turn it clockwise, get rid of coffee residue inside,
then you can clean it with cleanser, but at last you must rinse with clear water.
— Clean all the attachments in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
1. To make sure your coffee maker operating efficiently, internal piping is cleanly
and the peak flavor of coffee, you should clean away the mineral deposits left
every 2-3 months.
2. Fill the tank with water and descaler to the MAX level ( the scale of water and
descaler is 4:1, the detail refers to the instruction of descaler. Please use
"household descaler", you can use the citric acid (obtainable from chemist's or
drug stores) instead of the descaler (the one hundred parts of water and three
parts of citric acid).
3. According to the program of pre-heating, put the metal funnel (no coffee powder
in it) and carafe (jug) in place. Brewing water per " PRE-HEATING".
4. Press down the ON/OFF button to the lower position which is the "1" position,
the red lamp will be illuminated, you should press the pump control button to
the lower position which is the P position, make sure the coffee/steam button
is on the higher position which is the
out and close the pump, and waiting for a moment, the coffee maker begins to
be heated.
5. When the green lamp is illuminated, it shows the heating is finish. Pressing
down the pump control button to the lower position which is the "P" position and
make make two cups coffee (about 2Oz). Then close the pump and wait for 5s.
6. Press down the coffee/steam button to the lower position which is the
waiting for until the green indicator is illuminated. Make steam for 2min, then
turn the steam control knob to OFF position to stop making steam. Press and
release the ON/OFF to the higher position which is the "0" position to stop the
unit immediately, make the descalers deposit in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then pressing and release the coffee/steam button to the higher position which
is the
position, when the green lamp is illuminated, press down the pump
control button to the lower position which is the "P" position to brew until no
descaler is left.
9. Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat
the steps of 4-6 for 3 times (it is not necessary to wait for 15 minutes in step of
6), then brewing until no water is left in the tank.
10.Repeat the step of 9 at least 3 times to make sure the piping is cleanly.
position, when there is water flowing
position,
Advertisement
Table of Contents
