Samsung Galaxy A41 Instruction Manual page 106

■ Connecting Hotspot 2.0 compatible access point automatically
Set whether to automatically connect to Hotspot 2.0 compatible Wi-Fi
access point within the area without the Wi-Fi access point set.
1
From the Home screen,
"Wi-Fi"
2
→ "Advanced"
3
of "Hotspot 2.0"
■ Installing a network certificate
Install a network certificate.
1
From the Home screen,
"Wi-Fi"
2
→ "Advanced"
3
"Install network certificates"
■ Using static IP address
You can set the terminal to connect to Wi-Fi network using the static IP
address.
1
From the Home screen,
"Wi-Fi"
2
Tap the Wi-Fi network to connect → "Advanced"
3
Tap "IP settings" field → "Static"
4
Set required items
• For using static IP address, enter the following items.
- IP address
- Gateway
- Network prefix length
- DNS 1/DNS 2
• If you need to set the proxy, select "Manual" or "Auto-config" from
proxy and follow the onscreen instructions.
5
"SAVE" → "Connect"
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
■ Using Wi-Fi Direct
You can exchange data by connecting Wi-Fi Direct compatible devices.
1
From the Home screen,
"Wi-Fi"
2
→ "Wi-Fi Direct"
3
Tap a searched device name
• When the connection is accepted on the searched device, the
terminal will be connected via Wi-Fi Direct.
■ Disconnecting Wi-Fi Direct
1
From the Home screen,
"Wi-Fi"
2
→ "Wi-Fi Direct"
3
Tap a device name to disconnect
104
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
Settings