Related Manuals for Yard force AS C20
Summary of Contents for Yard force AS C20
- Page 1 The expert for robots in your home With one click to the online shop myRobotcenter.eu myRobotcenter.co.uk myRobotcenter...
- Page 2 AS C20 M0L-10ET-200 POLE SAW HEAD Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
- Page 3 Read this manual carefully prior to assembling and operating the pole saw. It is dangerous to operate this product without being familiar with these instructions. Keep this manual in a safe place and have it ready for future reference.
-
Page 4: Table Of Contents
AS C20 Original Instructions CONTENT Intended use General safety warnings Product safety warnings Symbols Technical data Description of product Assembly Operation Maintenance and storage Troubleshooting CE declaration... -
Page 5: Intended Use
INTENDED USE GENERAL SAFETY WARNINGS This machine may only be used outdoors for cutting wood and in combination with the Electrical safety original cutting chains. 1. Power tool plugs must match the outlet. Never modify This machine is not designed for heavy duty or commercial use. This machine may only be used outdoors for cutting wood and in combination with the the plug in any way. - Page 6 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Personal safety can reduce dust-related hazards. 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a Power tool use and care power tool while you are tired or under the influence of 1.
-
Page 7: Product Safety Warnings
PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS Use of the power tool for operations different from - Always keep proper footing and operate the pole those intended could result in a hazardous situation. saw only when standing on a fixed, secure and level surface. - Page 8 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS bystanders. - Kickback forces. Kickback forces can be controlled - Hold the chain saw by insulated gripping surfaces by the operator, if proper precautions are taken. Do only, because the saw chain may contact hidden not let go of the chain saw.
-
Page 9: Symbols
PRODUCT SAFETY WARNINGS SYMBOLS Residual risks Safety symbols Even when the tool is used as prescribed it is The purpose of safety symbols is to attract your attention not possible to eliminate all residual risk factors. The to possible dangers. The safety symbols and the following hazards may arise in connection with the tool’s explanations with them require your careful attention construction and design:... - Page 10 SYMBOLS SYMBOLS Please read all of the safety and operating Keep all bystanders at least 50 ft.(15m) away. instructions carefully before using this machine. Read the instruction manual before operating. Warning! The device is not protected against electric shocks when it touches high-voltage WARNING! Failure to follow the warnings and lines! Maintain a safe distance of 10m from live instructions may result in electric shock, fire and/...
-
Page 11: Technical Data
TECHNICAL DATA DESCRIPTION OF PRODUCT Parts description (Fig. A) Model AS C20 Bar sheath Main voltage Guide Bar Saw Chain Chain speed 320 m/min Tension Wheel Cutting length 20 cm Adjusting Wheel Oil bottle cap Oil tank 80 ml Bar code 080SDEA041 Delivery contents (Fig. -
Page 12: Assembly
ASSEMBLY OPERATION Install the guide bar and saw chain filter neck. Wipe off any excessive oil and replace the cap. Position the chain saw power head on its side with the side cover facing upwards. Turn the side cover knob anti-clockwise to remove the side cover and then loosen the NOTE: With upright position, oil should fill the inspection window. -
Page 13: Maintenance And Storage
MAINTENANCE AND STORAGE OPERATION WARNING: When servicing, use only identical replacement parts. Use of any other parts may Push sawing create a hazard or cause product damage. This technique involves sawing with the top side of the saw rail from bottom to top. The WARNING: Always wear protective gloves when performing any maintenance to the chain sawing chain pushes the machine backward toward the operator. -
Page 14: Troubleshooting
MAINTENANCE AND STORAGE TROUBLESHOOTING WARNING! For smooth and fast cutting, the chain needs to be maintained properly. The chain requires Before performing any repair work, always remove the battery pack. sharpening when the wood chips are small and powdery, the chain must be forced through the wood during cutting, or the chain cuts to one side. -
Page 15: Ce Declaration
MEROTEC GmbH, Otto-Brenner-Straße 8, 47877 Willich/ Deutschland Declare that the product: Machine Description: 20V Pole Saw AS C20 / M0L-10ET-200 Function: Cutting Log Complies with the essential health and safety requirements of the following directives: Machinery Directive 2006/42/EC Electromagnetic Compatibility Directive 2014/30/EC...