Related Manuals for Yard force ES N20
Summary of Contents for Yard force ES N20
- Page 1 ES N20 PCSEG06AA 750W ELECTRIC POLE SAW Original Instructions +44(0)1904 727513 support@yardforce.co.uk www.yardforce.eu...
- Page 2 Read this manual carefully prior to assembling and operating the Pole saw. It is dangerous to operate this product without being familiar with these instructions. Keep this manual in a safe place and have it ready for future reference.
-
Page 4: Table Of Contents
INTENDED USE ES N20 Original Instructions A Pole saw with telescopic arm, which is intended for pruning and removing branches from trees. It is not suitable for extensive sawing work and felling trees or for the sawing of materials other than wood. Please observe that our machine was CONTENT not designed for use in commercial, technical or industrial applications. -
Page 5: General Safety Warnings
GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS protection. Protective equipment such as dust a mask, 2. Avoid body contact with earthed or grounded surfaces, non-skid safety shoes, hard hats, or hearing protection such as pipes, radiators, and refrigerators. There is an used for appropriate conditions will reduce personal increased risk of electric shock if your body is earthed or injuries. -
Page 6: Product Safety Warnings
GENERAL SAFETY WARNINGS PRODUCT SAFETY WARNINGS 3. Disconnect the plug from the power source and/or SPECIAL SAFETY INSTRUCTIONS FOR MOUNTED the battery pack from the power tool before making any POWERED POLE SAW adjustments, changing accessories, or storing power 1. Keep all parts of the body away from the saw chain tools. - Page 7 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS recommended. Adequate protective clothing will reduce 14. Cut wood only. Do not use chainsaw for purposes not personal injury by flying debris or accidental contact with intended. For example: do not use chainsaw for cutting the saw chain.
- Page 8 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS g. Saw small round timber only on a sawing trestle in distance) in case of an accident. order to secure it from rolling away. p. When the chain is moving, do not let the tip of the h.
- Page 9 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS steps to keep your cutting jobs free from accident or Further important information: injury. Lay the power cable so that it will not come into contact 5. Kickback is the result of tool misuse and/or incorrect with branches or similar objects.
-
Page 10: Symbols
SYMBOLS SYMBOLS Safety symbols Please read all of the safety and operating The purpose of safety symbols is to attract your attention instructions carefully before using this machine. to possible dangers. The safety symbols and the Read the instruction manual before operating. explanations with them require your careful attention and full understanding. -
Page 11: Technical Data
SYMBOLS TECHNICAL DATA Model ES N20 Mains voltage 230-240 V~, 50 Hz Conforms to applicable safety standards. Rated Power 750 W Chain speed 12.5 m/s No load speed 1850 min This class II symbol indicates that the product Oil tank capacity 100 ml is correctly insulated. -
Page 12: Description Of Product
DESCRIPTION OF PRODUCT ASSEMBLY CAUTION! Parts description (Fig. A) Only connect the chainsaw to the mains supply once it has been completely assembled and 1. Scabbard the chain tension has been set. Always wear protective gloves when carrying out work on the 2. - Page 13 ASSEMBLY ASSEMBLY NOTE: Checking the automatic chain lubrication Rotate the chain tensioning knob clockwise to increase the chain tension. Regularly check the functionality of the automatic chain lubrication in order to prevent Rotate the chain tensioning knob anticlockwise to loosen the saw chain. overheating and the subsequent damage to the guide bar and saw chain associated with 5) The saw chain is correctly tensioned if it can be raised approx.
-
Page 14: Operation
OPERATION OPERATION Adjusting the telescope length (Fig. M) Working with the chainsaw Disconnect the chainsaw from the power supply. Preparation Adjusting the telescope length. Before each use, check the following to ensure work is carried out safely. 1. Pull back the lock button. 2. - Page 15 OPERATION OPERATION • Potential risk of injury from falling branches and flying wood projectiles! Sawing off smaller branches • If the machine is in operation, keep persons and animals away from the danger area. Place the stop face of the saw on the branch. This prevents fitful movements of the saw at •...
-
Page 16: Maintenance And Storage
MAINTENANCE AND STORAGE TROUBLESHOOTING Good maintenance is essential for safe, economical and trouble-free operation. It will also help reduce air pollution. The purpose of the maintenance and adjustment schedule is to keep the machine in the best WARNING! operating condition. Before troubleshooting, switch off the equipment and disconnect the mains plug. -
Page 17: Warranty
Yard Force Warranty Statement. SUMEC UK All Yard Force products are covered by a standard two-year warranty which can Unit A&B Escrick Business Park Escrick, York YO19 6 FD be extended to three years if the product is registered online within 28 days of purchase. If you do not register your product within 28 days of purchase, the two-year warranty will apply.