Table of Contents
Advertisement
2.
General Description
1. The Potterton Titanium Heat models are gas fired wall mounted powered flue condensing boilers.
2. The boiler modulates automatically to the system load up to the set output. It is designed for use on Natural Gas
(G20) only.
3. The two illuminated User Interaction Controller push buttons provide information about the operating condition of
the boiler.
4. The boiler is suitable for fully pumped open vented central heating and domestic hot water systems and sealed
systems.
5. An information label giving details of the model, serial number and Gas Council number is situated on the front left
underside of the outer case and is accessed by pulling forward gently.
6. The boiler data label is positioned on the inside lower right-hand side of the boiler and can be seen when the outer
case panel is removed.
7. The boiler is intended to be installed in residential/domestic environments on a governed meter supply only.
8. The boiler is installed with one of the purpose designed flues such as one of the standard telescopic flue kits
detailed in the Flue Accessories & Fitting Guide.
9. All systems must be thoroughly cleansed, flushed and treated with inhibitor.
10. This Engineer's Manual should be read in conjunction with the Installation & Service Manual supplied in the
Literature Pack.
2.1
Appliance Alpha Codes
Code
Number
7668920
Potterton Titanium 12 Heat
7668922
Potterton Titanium 15 Heat
7668923
Potterton Titanium 18 Heat
7668924
Potterton Titanium 24 Heat
7668925
Potterton Titanium 30 Heat
2.2
Main component parts
The Potterton Titanium Heat models use the following component parts:
Burner
Premix
Heat Exchanger
Aluminium
Gas Valve
SIT 848 1:1 ratio
PCB
SIT-R
Fan
Natalini DC
Model
Alpha
Gas Council
Code
Number
RWW
41-592-61
RXE
41-592-62
RXF
41-592-63
RXM
41-592-64
RXX
41-592-65
3
Advertisement
Table of Contents
