Table of Contents
Advertisement
Before using for the first time
6 Before using for the
first time
Prepare the appliance for use.
Before using for the first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Press
.
1.
The switch-on process takes a few
seconds.
Set the Drum Clean programme.
2.
Close the door.
3.
Pull out the detergent drawer.
4.
Pour standard washing powder
5.
into compartment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
Push in the detergent drawer.
6.
Press Start/Reload
7.
Nachlegen) to start the pro-
gramme.
a The display shows the remaining
programme duration.
a After the programme has ended,
the display shows: -0-.
(Start/
Before using for the first time en
Start the first wash cycle or press
8.
to switch off the appliance.
→ "Basic operation", Page 29
19
Advertisement
Table of Contents
