Table of Contents
Advertisement
Available languages
Available languages
Mounting Instructions
5
SMOOTH SIDE
RIBBED SIDE
Troubleshooting Guide
Minor problems often can be fixed without the help of an electrician. Before doing any work
on the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
Problem
Fixture doesn't light.
Fuse blows or circuit breaker
trips when light is turned on.
Care and Maintenance
IMPORTANT: This light fixture uses light emitting diodes (LEDs) to provide
light. LEDs do not have a filament to burn out like a traditional light bulb.
LEDs gradually emit less light over their lifetime, but will typically last 36,000
hours in a residential environment.
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner
and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or LEDs.
Replacement Parts List
Keep this guide handy for
ordering replacement parts.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at www.goodearthlighting.com/support or
call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of (6) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application.
The warranty is limited to use in a residential environment. We will repair or replace (at
our option) the unit in the original color, and style if available, or in a similar color and
style if the original item has been discontinued, without charge. Defective units must be
properly packed and returned to the manufacturer with a letter of explanation and your
original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a
Return Authorization Number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any
case limited to replacement of the defective light fixture product. The manufacturer will
not be liable for any other loss, damage, labor costs or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss,
damage, or injury which is (I) to person or property or otherwise; (II) incidental or
consequential in nature; (III) based upon theories of warranty, contract, negligence,
strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or
repair of the product. This warranty gives you specific rights, and you may also have
other rights which vary from state to state.
Ecolight® 1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
Ecolight ® is a registered trademark of Good Earth Lighting, Inc. All rights Reserved.
Place the cord in the hollow half of the switch body as
shown. Ensure that the cut sections of the wire do not
touch each other. Put the other half of the switch body
back on and squeeze the two halves together so the
contact blades inside the switch pierce the insulation
on the cut wire. Replace the attachment screw and nut
and tighten the switch body back together (Fig. 5).
Fig. 5
Cause
Power is off.
Defective wall switch.
Discontinue use.
6 YEAR LIMITED WARRANTY
Hardware Kit
ZH-UC1073F16-WHG
Warranty
- 3 -
Solution
Check if power supply is on.
Replace switch.
Call customer service.
Printed in China
Advertisement
Table of Contents
