Learn Mode - Multibrackets M Motorized Pro SD Installation Manual

Learn mode

How to set upper and
lower ideal position
Set the upper position
We recommend to set the upper position first, then the lower position. You can always restart the position setup process
by unplugging the power and follow the steps below again.
Unplug and connect
the power
The machine rises to the
ideal upper setting
Set the lower position
Note: The lower position setting is set without beep/alarm initiation.
Press the down button
once and complete within
5 seconds
Press the set button once
(alarm release)
Press the settings button
(Backside of remote)
Press the stop button
The machine descends to
the lower setting
The lower position
is set successfully
Upper position
The machine will always beep
alarm sound the lower limit has
been deleted successfully when
leaving the factory, enter the
lower limit to re-adjust
If the ideal height is not reached
it can be fine tuned by pressing
the up and down keys on the
remote control
Press the stop button
It will automatically walk
the set itinerary
Lower position
Press the up button
Press the setting button once
(a short beep is heard)
The upper
limit is set
successfully
If the lift has not
reached your ideal
position, you can press
the up and down keys
to jog fine adjustment
7.