Remote Control - Multibrackets M Motorized Pro SD Installation Manual

Remote control

Overview
Buttons
Front
Code matching mode for ceiling mount & remote control
1. First press the memory button on the
panel, the indicator light starts to flash.
2. Release the memory button (1), press the
settings button (2) on the back of the
remote control and hold it down. The light
indicator stops flashing. This indicates that
the code has been successfully written and
the remote control can be used. If not,
repeat the above steps and try a few more
times.
Rear
Up
Stop
Down
Light
indicator
Light indicator
Line control socket
2
Settings button
1
Memory button
RS232 serial port
Power line socket
6.