Summary of Contents for Raytheon PTS AS0005-RR-PSC-5
- Page 1 PTS, Inc. Raytheon RR-PSC-5 Power Supply Docking Station (PSDS) Manual MODEL #: AS0005-RR-PSC-5 Includes 1 PTS-H-0003J cable Compatible with 1 AN/PRC-150 (C-D) Document PTS-RR-PSC-5-2019-3-5 Perkins Technical Services, Inc.
-
Page 2: Safety Instructions
WARNING: TO PREVENT PERSONAL INJURY, DEATH OR EQUIPMENT DAMAGE DO NOT SHORT-CIRCUIT, DAMAGE, BY-PASS INTERNAL FUSES OR HANDLE INAPPROPRIATELY THE EXPOSED RAYTHEON HIGH VOLTAGE POWER CONNECTORS. SAFETY INSTRUCTIONS Warning and important safety instructions appearing in this manual are not designed to cover all possible conditions and situations that may occur. -
Page 3: Table Of Contents
Power Supply Docking Station (PSDS) Description Specifications Features Physical Dimensions Operational Benefits User Educational Requirements Operation of PSDS with Raytheon Radios Basic PSDS Set-Up Radio Installation Antenna & Handset Installation, Radio Configuration PSDS Operation PSDS Operational Inputs and Accessories LS-671 External Speaker Operation... -
Page 4: Power Supply Docking Station (Psds) Description
Perkins Technical Services, Inc. (PTS) has developed a rugged, lightweight, user- friendly power supply docking station (PSDS) for tactical radios. The PSDS provides the capability to operate a Raytheon PSC-5 radio in a continuous and efficient safe manner. The PSDS’s unique, lightweight slide-in, slide-out design allows for easy use and installation. -
Page 5: Specifications
Document PTS-RR-PSC-5-2019-3-5 Specifications Features Docking positions for 1 PSC-5 On/off for external amplifier Worldwide frequency input 47 to 440 Hz Worldwide AC voltage input 85 to 260 VAC Fully automatic voltage and frequency selection worldwide, no manual change required Built-in voltage surge protection Environmental operating range: Temperature: -30°C to 50°C Relative Humidity: 5% to 95%... -
Page 6: User Educational Requirements
Document PTS-RR-PSC-5-2019-3-5 User Educational Requirements Prior to use of the PSDS, the user should have completed the Raytheon Operators Course. The user should have a thorough understanding of Raytheon operations and a basic understanding of the PSC-5 set-up and configurations. -
Page 7: Psds Operation
Document PTS-RR-PSC-5-2019-3-5 PSDS Operation Facing the PSDS you will see one “POWER ON-OFF” rocker switch mounted on the front enclosure. Turn the switch to the on position (it will illuminate). The PSC-5 is now powered and ready for normal operation. Once the radio has completed self-test the user may program the radio for frequency, COMSEC configuration, power mode, etc. -
Page 8: Psds Operational Inputs And Accessories
Document PTS-RR-PSC-5-2019-3-5 PSDS Operational Inputs and Accessories SAFETY NOTICE: Power down the radios and disconnect (unplug) the PSDS power from the AC power source prior to connecting or configuring any of the following optional inputs or accessories. LS-671 External Speaker Operation The PSDS provides for the use of an external LS-671 for the radio net. -
Page 9: Exterior Cleaning
Document PTS-RR-PSC-5-2019-3-5 Exterior Cleaning The exterior of the PSDS may require cleaning. Disconnect the PSDS from all power sources. The exterior may be cleaned with a mild, warm water soapy solution. Wipe with a damp towel and dry with a clean towel. Do not use abrasives or oil-based cleaners. -
Page 10: Warranty
Document PTS-RR-PSC-5-2019-3-5 Warranty PTS warrants all power supply docking stations and transit cases furnished under contract to be free from defects in material and workmanship and will conform to all requirements of the contract. The PTS warranty shall be for a period of twelve (12) months from the date of the receipt by the user.