Connect Directly To A Computer - Xplornet Hub 5 User Manual

Connect the Hub 5 to your Personal Wireless Router
5
4
Before you start:
Disconnect your computer from the Xplornet Modem.
Disconnect your computer or any existing router from the Xplornet
1
Modem. Plug one end of the red cable into the LAN port on the
Modem and the other to the red WAN port on the Hub 5 router.
If using a computer, take the yellow cable and connect one end to the
2
Hub 5 router in either one of the four yellow LAN ports and the other
end to your Computer's Ethernet port. If not using a computer, skip
this step.
If using Xplornet Home Phone, connect your telephone by attaching
3
one end of the green RJ-11 cable to the Phone1 port of the Xplornet
Hub 5 router and the other end to your telephone base unit.
Connect the small black power adaptor cord into the Power port on
4
the Hub 5 router and then plug the other end of the adaptor into a
120-volt household outlet.
Power on your Xplornet Hub by pressing the On/Off button on the
5
back of the device.
Activate your Home Phone service:
Go to www.myxplornet.com
6
Password to to activate or login to your account.
Now you are ready to connect to Wi-Fi Internet and use your Xplornet
7
Home Phone.
For more help on setting up your Hub 5 router, activating your Xplornet
Home Phone Service, or setting up your Whole Home Wi-Fi service, go to
www.xplornet.com and navigate to the the
Xplornet
Hub 5
1
3
2
X P L O R N E T H U B
Modems may vary
in appearance
Modem
and enter your User Name and
Support | Getting Started
U S E R G U I D E
section.
7