Sony DR-NC201iP Operating Instructions

Noise Canceling
Headset
Operating Instructions
Manual de instrucciones
© 2012 Sony Corporation Printed in Malaysia
DR-NC201iP
How to use
This headset bundles a connecting cord featuring remote control with the MDR-NC200D Noise Canceling Headphones.
1
Unfolding the headset
Carrying case
2
Installing a battery
Tactile dot (on the left)
3
Connecting
4
Turning on the power
POWER
Utilizing the AI NC function
AI NC
Compatible iPod/iPhone models
On copyright
You can use the headset with only the following
models supporting remote control. Update
iPhone, iPod, iPod classic, iPod nano, iPod
your iPod, iPhone or iPad to the latest software
shuffle, and iPod touch are trademarks of
before use. In the Operating Instructions, iPod,
Apple Inc., registered in the U.S. and other
iPhone and iPad are collectively described as
countries. iPad is a trademark of Apple Inc.
"iPod" except in special cases.
"Made for iPod, " "Made for iPhone, " and "Made
– iPod touch 4th generation
for iPad" mean that an electronic accessory
– iPod touch 3rd generation
has been designed to connect specifically to
– iPod touch 2nd generation
iPod, iPhone, or iPad, respectively, and has
–
iPod nano 6th generation
been certified by the developer to meet Apple
4-297-894-11(1) – iPod nano 5th generation (video camera)
performance standards. Apple is not responsible
– iPod nano 4th generation (video)
for the operation of this device or its compliance
– iPod classic 120GB 160GB (2009)
with safety and regulatory standards.
– iPod shuffle 4th generation
– iPod shuffle 3rd generation
– iPhone 4
– iPhone 3GS
– iPad 2
–
iPad
for dual jacks for stereo mini jack
5
Wearing and controlling
Volume+
Center button
Volume–
Hearing environment sound After use
Turn off the power of the headset
MONITOR
English Noise Canceling Headset
WARNING
To reduce the risk of fire or
electric shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of electrical
shock, do not open the cabinet.
Refer servicing to qualified
personnel only.
The validity of the CE marking is restricted
to only those countries where it is legally
enforced, mainly in the countries EEA
(European Economic Area).
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
The following FCC statement applies only
to the version of this model manufactured
for sale in the USA. Other versions may not
comply with FCC technical regulations.
NOTE
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
Removing the battery
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
–
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
Using the Center
button
Operation Explanation
Single press Plays/pauses a track of
the connected iPod.
Double press Skips to the next track.
Triple press Skips to the previous
track.
Long press Starts the "VoiceOver*"
feature (if available).
Press once when Answers the call.
call is incoming
Press again Ends the call.
Microphone
Hold down for Rejects an incoming call
about two seconds (two low beeps confirm
the call was rejected).
* Availability of the "VoiceOver" feature
depends on iPod and its software version.
Note
Be careful not to unintentionally press any
buttons when you carry your iPod with this
headset connected.
– The noise canceling function works for
Utilizing the AI
noise in the low frequency band primarily.
Although noise is reduced, it is not canceled
Noise Canceling
completely.
– The noise canceling effect may not be
pronounced in a very quiet environment, or
The AI Noise Canceling function analyzes
some noise may be heard.
environmental ambient sound components
– When you use the headset in a train or a
and automatically selects the most effective
car, noise may occur depending on street
noise canceling mode.
conditions.
When you press the AI NC button while the
– Mobile phones may cause interference and
POWER switch is set to "ON, " beep sounds
noise. Should this occur, locate the headset
and the headset starts the analysis. During
further away from the mobile phone.
the analysis (approx. 3 seconds), the POWER
indicator blinks, and no sound is heard from
Notes on using on the airplane
the headset.
Do not use the headset when use of electronic
When the analysis is completed, the sound
equipment is prohibited or when use of
reproduction starts with the most effective
personal headset for in-flight music services is
noise canceling mode.
prohibited.
Noise canceling mode types
Notes on usage
NC Mode A: Noise mainly in an airplane is
– Because the headset is of a high density
effectively reduced.
enclosure, forcing them against your ears
NC Mode B: Noise mainly in a bus or a train is
may result in eardrum damage. Avoid using
effectively reduced.
the headset where it is liable to be struck by
NC Mode C: Noise mainly found in an office
people or other objects, such as a ball, etc.
environment (PC, copier, air
– Pressing the headset against your ears may
ventilation, etc.) is effectively
produce a diaphragm click sound. This is not
reduced.
a malfunction.
–
Clean the headset with a soft dry cloth.
Tips
– Do not leave the plug dirty otherwise the
– When the power of the headset is turned on,
sound may be distorted.
NC Mode A is set.
– Be sure to consult a Sony dealer when the
–
Press the AI NC button again to reset the
earpads become dirty or damaged, or when
noise canceling mode if ambient noise has
the headset requires repair work.
changed, such as when you move outdoors
– Do not leave the headset in a location
from a room.
subject to direct sunlight, heat or moisture.
– Do not subject the headset to excessive
shock.
Hearing
– Handle the driver units carefully.
– If you feel drowsy or sick while using this
environment sound
headset, stop use immediately.
Notes on headset
Press the MONITOR button while the POWER
High volume may affect your
switch is set to "ON. "
hearing. For traffic safety, do not
To cancel this function, press the MONITOR
use while driving or cycling.
button again.
As a headset reduces outside sounds, it may
cause a traffic accident. Also, avoid listening
Beep sound and
with your headset in situations where hearing
must not be impaired, for example, a railroad
indicator status
crossing, a construction site, etc.
Note on static electricity
Status/ Beep sound Indicator
Static electricity may cause mild tingling in
Function
your ears.
Power off No beep Lights off
To minimize the effect, wear clothes made
Power on Beep once Lights on from natural materials.
AI NC Beep twice Blinks twice
If you have any questions or problems
MONITOR Beep once Blinks slowly
concerning the system that are not covered
Low battery Long beep (2 Blinks quickly in this manual, please consult the nearest
seconds) (30 seconds)
Sony dealer.
Troubleshooting
Precautions
No sound
What is noise canceling?
The noise canceling circuit actually senses – Replace the battery with a new one.
You can listen to the music using the headset
outside noise with built-in microphones and
even when the POWER switch is set to "OFF. "
sends an equal-but-opposite canceling signal
to the headset. In this case, the digital circuits for noise
canceling and high-quality sound are not
Notes on the noise canceling
active, and the headset operates as a regular
function headset.
– Check the connection of the headset and the
–
Adjust the earpads so that they cover your
equipment.
ears, otherwise noise canceling will not
– Check that the connected equipment is
function properly.
turned on.
– The noise canceling effect may vary
– Turn up the volume of the connected
depending on how you wear the headset.
equipment.
– Do not cover the microphone of the headset
– Check if the MONITOR function is on (the
with your hands. The noise canceling
indicator blinks slowly). Press the MONITOR
function may not work properly.
button to turn it off.
The noise canceling effect is not
sufficient
– The noise canceling function is effective
in low frequency ranges such as airplanes,
trains, or offices (near air-conditioning, etc.)
and is not as effective for higher frequencies,
such as human voices.
– Turn on the headset.
Microphone
Distorted sound
– After you turn on the power of the headset,
– Turn down the volume of the connected
you may hear a slight hiss. This is the
operating sound of the noise canceling equipment.
function, not a malfunction.
Power does not turn on
– Check if the battery has expired (the POWER
indicator lights off ) and the battery is
inserted in the correcrt orientation. Replace
the battery with a new one or reinsert the
battery in the correcrt orientation.
No operation works
– Set the POWER switch of the headset to "OFF, "
confirm the connections, and then set the
POWER switch back to "ON. "
The connected iPod does not work
–
Check if the cord is connected correctly.
Connect the L type plug to the iPod and the
other plug to the headset.
Features
– Digital noise canceling headset with
Sony's unique DNC Software Engine.
Creation of a high-precision canceling
signal delivers outstanding noise canceling
performance.
– AI (Artificial Intelligence) Noise Canceling
function.
Select AI NC button for optimal noise
canceling mode based on intelligent analysis
of the environmental ambient noise.
– Detachable cord with the handy and easy-to-
use remote control designed exclusively for
the iPod, iPhone and iPad.
–
In-line microphone for hands-free phone
calls of iPhone.

Specifications

General
Type Dynamic, closed
Driver units 40 mm, dome type (CCAW
adopted)
Power handling capacity
50 mW
Impedance 68 Ω at 1 kHz (when the
power is on)
35 Ω at 1 kHz (when the
power is off )
Sensitivity 103 dB/mW (when the power
is on)
102 dB/mW (when the power
is off )
Frequency response
8 Hz – 23,000 Hz
Total Noise Suppression Ratio 1)
Approx. 17.5 dB 2)
Power source DC 1.5 V, 1 × LR03 (size AAA)
battery
Mass Approx. 180 g (6.4 oz)
Talk microphone Open circuit voltage level
–42 dB (0 dB = 1 V/Pa)
Battery life
Battery Approx. hours
3)
Sony alkaline battery 22 hours 4)
LR03 SIZE AAA
Included items
Headphones MDR-NC200D (1)
Plug adaptor for in-flight use 5) (single/dual) (1)
Connecting cord (1.2 m (47 1 / in), four-
4
conductor gold plated L type stereo mini plug)
(1)
Carrying case (1)
Sony LR03 (size AAA) battery (1) 6)
Operating Instructions (1)
Warranty card (1)
1) Under the Sony measurement standard.
2) Equivalent to approx. 98.2% reduction of
energy of sound compared with not wearing
headset.
1 kHz, 0.1 mW + 0.1 mW output
3)
4) Time stated above may vary, depending on
the temperature or conditions of use.
5) May not be compatible with some in-flight
music services.
6) For trial use.
Design and specifications are subject to
change without notice.